Operation - Matrix Pgt 3 In 1 Traduction De La Notice Originale

4.8 Fuel
ATTENTION! Turn the machine off, let it
cool and remove the spark plug before
filling fuel.
Use only a mixture of unleaded petrol and special
2-stroke engine oil in a ratio of 40:1. Mix the fuel
mixture as indicated in the fuel mixing table.
Important:
Caution: Do not use any mixing ratio, and no
pure gasoline. Do not use a fuel mixture which
has been stored for longer than 90 days. The
manufacturer's warranty will be voided in case of
engine damage due to inadequate lubrication.
Important: Only use containers designed and

5. Operation

5.1 Starting / Turning off the gasoline brush cutter-trimmer-pruners-combination device
Only start the gasoline brush cutter-trimmer-pruners-combination device if an
attachment is connected! Remove the appropriate transportation protection and
inspect the unit in good working condition. Never use a damaged, poorly adjusted or
serviced or not completely and securely assembled device.
3
A14
OFF
A15
60
approved for the purpose to transport and store
fuel.
Mix gasoline
Pour the correct quantities of petrol and 2-stroke
oil in a ratio of 40:1 into the mixing bottle (30).
Then shake the bottle well.
During longer break. Drain tank and refill before
starting work.
Pour gasoline
- Unscrew the lid of the tank slowly so that
pressure and gasoline vapors can escape.
- Fill the fuel mixture on top with a hopper and
screw on the lid back tightly.
Set the stop/start switch (3) on position "I".
Place the choke lever (24) to the "OFF"(
position.
24
)