Assembly - Matrix Pgt 3 In 1 Traduction De La Notice Originale

Always switch off the equipment and
pull out the spark boot plug before
carrying out any maintenance work.
Electric shock can cause fatal
injury. Keep a distance of at least
10 m from power cables.
Maximum speed of the cutting
tool
Cutting diameter of the cutting
tool
Minimum speed in the high-
button operation
effective cutting length
Warning against toxic waste
gases
Caution thrown objects when
operating brush cutter
Keep bystanders at least 15
meters
Caution thrown objects when
operating grass trimmer
primer
Stop the engine before
refueling
Mixing ratio of fuel /
engine oil is 40:1
Direction of the chain
movement and teeth.
Caution: Hot equipment parts.
Keep your distance.
Sound power level guaranteed.
114

3. Assembly

Check if all parts are included and if they were
damaged during transport before assembly.
Depending on the attached cutting tool, the
petrol brush cutter is intended to trim lawns or
grass, to cut brushwood, shrubbery, bushes, and
small trees in private areas.
This tool shall not be used for any other purpose.
The manufacturer is not liable for any improper
use, or for any modifications of the engine.
Observe the notes on safety, the assembly and
operation instructions, and in addition to that
prevailing accident prevention regulations.
Pole saw
The pole-mounted petrol-powered pruner is
designed for lopping off tree branches. It is not
suitable for extensive sawing work, felling trees
or sawing any materials other than wood.
The equipment may be used only for its intended
purpose. Any other use is deemed to be a case of
47