Safety - Matrix Pgt 3 In 1 Traduction De La Notice Originale

2 Safety

Dear Customer,
Congratulations for the purchase of your petrol
brush cutter.
Carefully read this manual before you start
operating the engine.
Improper use may cause damage to persons
and property. Persons are not familiar with this
manual are not permitted to operate the tool.
Keep this manual at a safe location.
Children and teenagers younger the age of 16
are not permitted to use the tool. Teenagers older
than age of 16 and working under supervision of
a trained person are permitted to use the tool.
Proper Use
Depending on the attached cutting tool, the
petrol brush cutter is intended to trim lawns or
grass, to cut brushwood, shrubbery, bushes, and
small trees in private areas.
This tool shall not be used for any other purpose.
The manufacturer is not liable for any improper
use, or for any modifications of the engine.
Observe the notes on safety, the assembly and
operation instructions, and in addition to that
prevailing accident prevention regulations.
Make sure that no persons or animals are close to
the working area (minimum distance of 15 m).
Grass being cut and thrown up may contain
foreign objects such as stones. You are
responsible for the safety in your working area,
and you are liable for damages to persons or
property.
It is not permitted to either start or use the petrol
brush cutter in the vicinity of persons or animals.
Do not use the tool when you are tired or
distracted, or your ability to react is impaired
when you are under the influence of alcohol or
medication.
Inattentiveness may cause serious injuries.
Use approved safety goggles.
Use approved ear protection.
Use high-quality safety gloves.
Use high-quality skid-proof protective shoes with
safety steel caps. Never operate the tool wearing
sandals, or when barefoot.
Always wear an approved safety helmet for
working in a forest.
Do not wear wide clothing or jewelry.
Wear long trousers to protect your legs.
Wear safety helmet for long hair.
Loose clothing, jewelry, and long hair can get
caught in the moving parts.
Wear suitable and durable tight working clothes.
Keep body parts and clothing away from the
cutting tool when you start the engine, or keep it
running.
Make sure you are standing in a stable and secure
position during work. Avoid moving backwards
with the tool due to risk of stumbling. Avoid any
unnatural posture.
When the petrol cutting blade has been operated
for long hours, it may cause a circulatory disorder
due to vibration (Raynaud's disease). In this case,
it is impossible to specify any length of operation,
because it may differ from person to person. The
following factors can have an influence on this
phenomenon: Circulatory disorders in the hands
of the operator, low outdoor temperatures, long
hours of operation. Therefore, it is recommended
to wear warm protective gloves, and to take
breaks at regular intervals.
43