Stihl FSE 31 Notice D'emploi page 29

Avoid clothing that could get
caught on branches or brush
or moving parts of the
machine. Do not wear a scarf,
necktie or jewelry. Tie up and
confine long hair (e.g. with a
hair net, cap, hard hat, etc.).
Wear sturdy shoes
with non-slip soles.
WARNING
To reduce the risk
of eye injuries,
wear close-fitting
safety glasses in
accordance with
European Stand-
ard EN 166. Make
sure the safety
glasses are a snug
fit.
Wear a face shield and make
sure it is a good fit. A face
shield alone does not provide
adequate eye protection.
Wear hearing protection, e.g.
earplugs or ear muffs.
Wear robust work
gloves made of
durable material
(e.g. leather).
FSE 31, FSE 41
STIHL offers a
comprehensive range of
personal protective clothing
and equipment.
Transporting the Power Tool
Always switch off the power
tool and unplug it from the
power supply.
Transporting by vehicle:
Properly secure the power
tool to prevent turnover and
damage.
Before Starting Work
Inspect the power tool.
Check that your power tool is
properly assembled and in
good condition – refer to
appropriate chapters in the
instruction manual.
The trigger switch must
–
move freely – the switch
must return to the idle
position when it is
released.
Use only an approved
–
combination of cutting
attachment, deflector and
handle. All parts must be
assembled properly and
securely. To reduce the
risk of injury, never use
metal cutting attachments.
Check that the cutting
–
attachment is properly and
securely mounted and in
good condition.
Check protective devices
–
(e.g. deflector for cutting
attachment) for damage or
wear. Always replace
damaged parts. Never
operate the unit with a
damaged deflector.
English
27