WIKA TEFRACTO-PAD TC59-T Mode D'emploi page 6

3. Safety
3.2 Intended use
These sensors are used for temperature measurement in industrial applications.
The instrument has been designed and built solely for the intended use and may only be
used accordingly.
EN
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
▶
Any use beyond or different to the intended use is considered as improper use.
Do not use this instrument in safety or emergency stop devices.
3.4 Responsibility of the operator
The instrument is used to measure temperature in industrial/process applications. The
operator is therefore responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
that suitable first-aid equipment is available and aid is provided whenever required.
■
that the operating personnel are regularly instructed in all topics regarding work safety,
■
first aid and environmental protection and know the operating instructions and in
particular, the safety instructions contained therein.
that the instrument is suitable for the particular application in accordance with its
■
intended use.
that personal protective equipment is available.
■
6
Refrain from unauthorised modifications to the instrument.
Do not use the instrument with abrasive or viscous media.
WIKA operating instructions model TC59-T (TEFRACTO-PAD )
®