Bartscher Compact Cool 700.080 Mode D'emploi page 30

(Cold/Hot toggle switch in DC mode)
①
Set the AC/DC toggle switch to DC.
②
If the Cold/Hot toggle switch is set to COLD (cooling),
come on. The unit will begin cooling.
④
If the Cold/Hot toggle switch is set to HOT,
begin warming.
⑥
If the Cold/Hot toggle switch is set to „0" , the unit will stop cooling/warming.
Alternating current will remain on
WARNING!
Do not flip the function switch directly from one mode to another. Prior to
changing the current mode, leave the switch in the "0" position for approx. 3
minutes. Otherwise the cooling system will malfunction and may be damaged.
WARNING!
If the unit is connected to an AC source, but the AC/DC toggle switch is set to DC,
or the unit is connected to a DC source but the AC/DC toggle switch is set to DC,
the unit will not work but is not damaged.
WARNING!
Never connect the AC and DC cords at the same time, as this may lead to the unit
being damaged.
- 28 -
⑤
the red LED will come on. The unit will
⑦
if the AC/DC toggle switch is set to DC.
③
the green LED light will