Bartscher Compact Cool 700.080 Mode D'emploi page 29

B
AC/DC toggle switch
①
AC/DC toggle switch
should be set to AC. After
inserting the cable,
electricity begins flowing.
C
COLD/HOT toggle switch
(Cold/Hot toggle switch in AC mode)
①
Set the AC/DC toggle switch to AC.
②
If the Cold/Hot toggle switch is set to COLD (cooling),
come on. The unit will begin cooling.
④
If the Cold/Hot toggle switch is set to HOT,
begin warming.
⑥
If the Cold/Hot toggle switch is set to OFF, the unit will stop cooling/warming.
Alternating current will remain on
②
AC/DC toggle switch
should be set to DC. After
inserting the DC cable,
electricity begins flowing.
⑤
⑦
if the AC/DC toggle switch is set to AC.
③
If the AC/DC toggle switch
is set to the „0" position, the
unit is turned off – even if an
AC or DC cable is inserted or
the COLD/HOT toggle switch
is set to COLD (cooling) or
HOT (warming)
③
the green LED light will
the red LED will come on. The unit will
- 27 -