Troubleshooting - SilverCrest SDQWC A2 Instructions D'installation

LED indicators
The product has two LEDs that indicates its
operational status:
LED indicator
White light
LED off
Blue light
Blue light flashing
Green light
P Troubleshooting
What should I do if the LED indicator
of the product is not lit during starting
process (Boot phase)?
Check the USB cable connection between USB
adapter (not included) and the product. The
USB cable must be firmly connected.
Check the connection between the mains socket
and the USB adapter (not included).
status
2 / 3
Status
Starting process
(Boot phase) /
Standby
Off
Charging
Fault condition
Full Charge
GB/IE 39