SilverCrest SDQWC A2 Instructions D'installation page 36

2. Plug the USB adapter (not included) into an
easily accessible mains socket.
3. LED indicator 1
when the product is under standby mode and
there no mobile device on the Qi charging
surface1
1
4. Place the mobile device on the Qi charging
surface 1
1
of the device is aligned over the center of the
Qi charging surface. Charging will begin on
contact. The LED indicator 1
when charging is active on Qi charging surface
1 . The LED indicator 2
1
2 and 2
or 2 .
4
or 2 . Make sure the center
4
3 will light up white
2 lights up blue
lights up blue
3
GB/IE 37