Télécharger Imprimer la page

Démontage Et Montage Des Sangles - Britax BABY-SAFE Mode D'emploi

Publicité

Thread the shoulder straps through the shoulder
Hook the shoulder straps back onto the connecting
piece
.
17
7.5 Remo ing and re tting the straps
This is how you remo e the straps:
1. Unhook the shoulder straps
2. Push the strap loop inwards from the short side of
the metal part
and unhook the metal part (see
18
chapter 7.3).
3. Pull off the straps.
This is how you re t the straps:
1. Engage the buckle tongues in the harness buckle
(see 4.5).
2. Now take the strap loops which are marked with an
outer and then through the inner side slots of the
baby seat. Make sure the shoulder straps aren't
twisted or switched.
3. Hook the metal part into the
long side and then the short side of the metal part).
from the cover.
03
18
fentes de la ceinture adéquates.
Raccrochez les bretelles dans l'élément de
liaison
.
17
7.5 Démontage et montage des sangles
Pour démonter les sangles :
1. Décrochez les bretelles
2. Faites glisser les passants des sangles sur le petit
côté de l'élément métallique
dernier (voir chapitre 7.3).
3. Retirez les sangles.
Pour monter les sangles :
1. Enclenchez les languettes dans le fermoir (voir
chapitre 4.5).
2.
couture supplémentaire, tout d'abord au travers de
la fente latérale extérieure puis de la fente latérale
intérieure de la coque pour bébé. Ce faisant, veillez
à ne pas tordre la ceinture.
3. Accrochez l'élément métallique
passant de la sangle (tout d'abord le côté long, puis
le côté court de l'élément métallique).
et la housse.
03
et décrochez ce
18
dans le grand
18
64

Publicité

loading