Mennekes AMTRON Wallbox Guide D'installation page 9

Wechsel ein-auf zweispaltig
1 General
This installation manual applies exclusively to stainless steel
columns in connection with the AMTRON® charging
stations.
 Please follow the installation and operating manual for
®
the AMTRON charging stations in addition to this
installation manual.
NKN fåíÉåÇÉÇ=rëÉ=
Stainless steel column for the assembly of the AMTRON®
charging station on a bedplate as a floor-mounted device.
Depending on the variant, the stainless steel column can
be designed for the mounting of one or two charging
stations.
NKO aÉäáîÉêó=`çåíÉåíë=
Fig. 1: Delivery contents
1
Stainless steel column
2
Protective roof (optional)
3
Installation manual
4
Bit insert for safety screws on the base plate
5
Cleaning cloth
6
4 x hexagon socket counter-sunk screws VA
M6 x 20 mm (for the dual variant, 8 x counter-sunk
screws are enclosed)
2 Safety
For your own safety, please read the General Safety
Information through carefully and observe it for safe
assembly.
In addition to this manual, please also observe the national
legal provisions (e. g. accident prevention and environmental
regulations) for the respective end-user country.
OKN `ÜçáÅÉ=çÑ=äçÅ~íáçå=
= t~êåáåÖ=
oáëâ=ÇìÉ=íç=ìåëìáí~ÄäÉ=ÉåîáêçåãÉåí~ä=ÅçåÇáíáçåë=L=
áåëí~ää~íáçå=äçÅ~íáçåëK=
Unsuitable ambient conditions and setup locations may lead
to dangerous situations when dealing with electricity.
 Observe the details provided in the section "Site
Selection" in the installation and operating manual of
the charging station when selecting the setup site!
OKO bäÉÅíêáÅ~ä=ÅçååÉÅíáçå=
= a~åÖÉê=
oáëâ=çÑ=äçëë=çÑ=äáÑÉ=Ñêçã=ÉäÉÅíêáÅ=ëÜçÅâ>=
There is a risk of injury for persons performing tasks for
which they are neither qualified nor have received
appropriate training.
 Work on the electrical system may only be performed
by persons who have had recognized training as a
professional electrician and who have the required
skills and knowledge.
The assembly and possibly required electrotechnical work
(e.g. disconnection of the feedline) may only be performed
by a professional electrician or a person who has received
electrotechnical education!
 Do not make any modifications to the stainless steel
column.
 Avoid beding or crushing the lines.
 Do not pull lines over any sharp edges or items.
EN
1