Basic Operation; Before Starting Playback - Denon DN-C630 Mode D'emploi

ENGLISH
4

BASIC OPERATION

POWER
COMPACT D SC PLAYER
STOP
PHON S LE EL
M N M X
6

(1) Before Starting Playback

1
Load a disc.
Make the presettings according to the usage purpose.
(See page 20.)
NOTE: Step 1 and 2 can be performed in the opposite
order.
Select the play finish mode. (Preset Function)
Finish Stop
Finish Next
2
Finish Recue
To standby at the point where the sound begins.
(Preset Function)
Set the "CueDet." Level.
When a track is selected, the position at which the sound
begins is found when a track is cued and the standby
mode is set at that point.
Select the play mode.
Press the PLAY MODE button.
3
Select the track to be played.
Turn the select knob (
4
The selected track is cued and the standby mode is set.
12
6 3 5
-1 -1
DN C630
O EN CLOSE IME
PLAY
TRACK END MON NDEX REPEAT A B P TCH
MODE
CUE PLAY / PAUSE
PR G PL Y
S ARCH ROG IN
ON OFF
PRE ET
4,5 7
-2 -2
The stop mode (the servo functions
turn off) is set when playback
finishes.
The standby mode is set at the
beginning of the next track when
playback is finished.
* After the final track is played, the
standby mode is set at the
beginning of the first track.
When playback is finished, the
standby mode is set at the position at
which playback was started.
Single track
play mode
Lit
Continuous
play mode
8 9
– ).
Flashing during search Lit when standby
0%
To select an index number.
Press the INDEX button.
5
-1
NOTE: The track select mode is set when the button is
Turn the select knob (
5
-2
The selected index number is cued and the standby mode
is set.
If a non-existent index number is selected,
" No
flashes.
To check the play start position.
Press the PLAY/PAUSE button.
6
-1
Monitor the playback signals to check the play start
position.
Press the CUE button.
6
Lit
-2
The pickup returns to the play start position and the
standby mode is set. (Back Cue)
To check the play end position.
Press the END MON button.
7
NOTE: If the CUE button is pressed during the end
INDEX
The index number appear when the index
select mode is set.
off.
There is no need to select an index number when
you want to play the track from the beginning.
8 9
– ).
Index number
Flashing during search
02.Index " appears and the index number
Lit
PLAY / PAUSE PLAY / PAUSE
Flashing
CUE CUE
END MON
The end monitored, then the pickup
returns to the play start position and the
standby mode is set. (End Monitor)
monitor operation, the end monitor operation is
canceled, the pickup returns to the play start
position and the standby mode is set.
Index number
Lit when standby
Off
CUE
Lit
CUE