Housing; Storage; Disposal - SilverCrest SDB 2400 B2 Mode D'emploi

As soon as a suitable temperature is reached,
steam and boiling water will exit the holes in the
sole of the iron 9. Any impurities that may be
present are fl ushed out.
6) When no more water/steam comes out of the
iron sole, set the steam control 8 to
over a towel or old piece of cloth a few times
to dry the sole of the iron 9 thoroughly.
TEMP 2 button repeatedly until
7) Press the
you hear a beep and the display 1 reads
Standby in red letters.
8) Remove the power plug from the mains power
socket.
9) Allow the steam iron to cool down before put-
ting it away.

Housing

RISK OF ELECTROCUTION!
► Always remove the plug from the mains
power socket before cleaning the appliance.
► Never open the appliance housing! Otherwise
there is a risk of an electric shock.
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it! Otherwise, there is a risk of
burns!
CAUTION – PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners.
These will damage the surface of the appli-
ance!
► Do not use aggressive, chemical or abrasive
cleaning agents! They could irreparably dam-
age the surface!
■ Clean the housing with a soft, dry cloth only.
│ GB │ IE │ NI
■ 10

Storage

■ Empty any remaining water from the water tank.
■ Store the cooled-down appliance in a clean,
dust-free and dry location.
. Iron

Disposal

Dispose of the appliance via an approved disposal
company or your municipal waste facility. Please
comply with all applicable regulations. Please
contact your waste disposal centre if you are in any
doubt.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
Never dispose of the appli-
ance in your normal domestic
waste. This product is subject
to the provisions of European
Directive 2012/19/EU.
SDB 2400 B2