Gaggenau VL 414 110 Notice De Montage page 13

3 Use the installation aid
downdraft ventilation unit in the recess and align it.
Remove the sealing element. Insert the installation
aid at an angle into the ventilation recess and align
it vertically to the appliance. Position the appliance
at an angle in front of the downdraft ventilation unit
and press it into the recess via the installation aid.
Remove the installation aid. Fasten the downdraft
ventilation unit as described above.
Notes
‒ You must use the included installation aid if the
downdraft ventilation unit is in a combination
with several Vario appliances in the last or last
but one position.
‒ The installation aid protects the appliance edges
from damage.
4 Fit the connection piece in the required position
Notes
‒ Depending on the installation situation, the
exhaust air can be guided in three different
directions.
‒ Corresponding to the space conditions, the
connection piece can be turned by 180°.
Horizontally insert the
.
‒ For details of exhaust air guidance, also refer to
the instructions for the remote fan unit.
5 Secure the exhaust air pipe to the connecting
pieces and seal appropriately..
Note: If you use an aluminium pipe, smooth the
connection area beforehand.
.
13