dirna Bergstrom Bycool Compact 1.4 Instructions De Montage page 21

COMPACT
Fasten supports tightening nuts until outside
14
EPDM joint of equipment is compressed,
between 3 and 6 mm.
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with unit
base, as indicated on diagram.
3-6mm.
Cabin roof
Fasten selflocked nut until
EPDM gasket is compressed
14
between 3 and 6 mm.
Tighten (4) M8 nuts to support and (4) to Unit
15
base.
EPDM gasket
10 mm*
(*) (approx. after tightening)
Air conditioning for vehicles
Base
Bracket
21
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
EN
EN
14
15