The Display; Attachment Of The Display - Gazelle Innergy Manuel De L'utilisateur

5

The display:

1 Pedal assistance on/off
2 Lights on/off manually
3 Display release
4 Mode button; for showing "total km", "average" and "trip"
5 Eco/boost button; for determining the degree of assistance
6 Battery capacity
7 "Lights on" symbol
8 Speed indicator
9 "Maintenance required" symbol
10 Automatic light sensor
68
216-03-1708 Gewijzigde herdruk Handleiding Innergy.indd 68-69
7 8 9 10 1
6 4 3 2

Attachment of the display

The supplied loose display (see above) can easily be
attached to the display holder. The display holder is
located on the left-hand side of your handlebars.
Note: The display itself does not contain a battery. As
soon as you take the display out of the holder, it will
not show any information.
• T ake the display between your thumb and index
finger. (Photo 19)
• F irst click the right side of the display into the
holder and then push down the left side. (Photo 20)
• I f the display is attached correctly and the battery
has been slid into the bike properly, the display
shows speed, battery capacity and total number of
kilometres. (Photo 21)
• I f this is not the case, then check to see if the
display and/or battery are properly attached to the
bike.
18
19
20
21
69
05-08-2008 12:00:39