Unpacking The Unit - Kaco blueplanet 87.0 TL3 Mode D'emploi

Fig. 3: Device for outdoor installation
Fig. 5: Free-standing installation beneath PV system
5.2

Unpacking the unit

CAUTION
Risk of injury if the body is overloaded!
Lifting the device for transportation, to change location and during installation can lead to injuries (e.g.
spinal injuries).
› Only lift the device using the openings provided.
› The device must be transported and installed by at least 2 persons.
↻ The device is transported to the installation location.
1 Remove the plastic strap from the pallet and packaging.
2 Pull the clip lock off the packaging.
3 Pull the hood upwards to remove it and place the cardboard packaging to one side together with the mount and ac-
cessories.
4 Set the device upright with the base section and side sections.
5 Remove the uppermost side section and base section from the device.
» If the device is in the correct installation position: Proceed with the installation of the mount.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanaet 150 TL3
10-90°
Fig. 4: Permissible installation location
Fig. 6: Mounting advice for installation beneath PV system
300 mm
Page 13
EN