RIDGID 1200RV0 Mode D'emploi page 11

SP6937-1_SP6937-1 1/16/15 2:38 PM Page 11
Maintenance (continued)
Cord Storage
Simply, wrap the power cord around the
power head and snap the connector on
the plug to a wrap of the cord.
Cord Wrap
Area
Blower
Port
Power
Cord
Caster
Drum
Caster Feet
w/Accessory Storage
Storage
Before storing your Vac, the drum should
be emptied and cleaned. The cord should
be wrapped around the unit and the hose
should be stored as described in this
manual. Accessories should be kept in
Pull
the same area as the Vac so they can be
Handle
readily available. The Vac should be
stored indoors.
Casters
If your casters are noisy, you may put a
drop of oil on the roller shaft to make
Drum
them quieter.
Inlet
WARNING: to assure product
SAFETY and RELIABILITY, any other
maintenance, repairs or adjustments
Drain
should be performed by Authorized
Cap
service centers, always using
RIDGID replacement parts.
11