LG A270 Guide De L'utilisateur page 113

the unauthorized user's knowledge. You can
activate the ATMT and configure your settings in
this menu. (The default ATMT code is "0000".).
› Change codes - To change your Security code,
PIN code, PIN2 code or ATMT code, enter the
old code followed by the new one.
• Power save - If you set Always on, you can save
the battery power when you are not using the
phone. Choose to switch between power save
settings Always on, Night only or Off.
• Network selection - You can select a network
that will be registered either automatically or
manually.
• SOS service - When SOS service is turned on,
send the emergency SMS by press and holding
the '9' key on your keypad in idle screen, SOS
mode will now be turned on. The SOS messages
will be sent to the phone number(s) listed in
Recipient list. While SOS mode is active,incoming
calls by them will be automatically accepted. To
exit SOS mode, on the idle screen push the end
key and select Yes.
• Reset settings - Select Reset settings to restore
the factory settings. You need the security code
to activate this function. The default number is
"0000".
• Memory status - You can check the free space
and memory usage of each repository.
23