Bosch MaxoMixx MSM8 Série Mode D'emploi page 9

9. Hold down both release buttons and
remove the base unit.
10. Turn the gear attachment anticlockwise
and remove.
11. Take out the blade.
12. Empty the container.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 10
Sample recipe:
Honey cake with apples
Honey-apple mixture (CNHR29):
– 110 g forest honey (5 °C)
– 30 g apple in cubes (11 mm)
■ Add to the universal cutter and mix on
Turbo speed for 3 seconds.
Honey-apple mixture (CNHR29C):
– 130 g forest honey (5 °C)
– 30 g apple in cubes (11 mm)
■ Add to the universal cutter and mix on
Turbo speed for 2 seconds.
Cake:
– 3 eggs
– 60 g butter
– 100 g plain white flour
– 60 g ground walnuts
– 1 tsp cinnamon
– 2 packets vanilla sugar
– 1 tsp baking powder
– 1 apple
■ Separate the egg yolks from the whites.
■ Beat the egg whites until stiff.
■ Beat the yolks and sugar, then add the
softened butter and the
mixture.
■ Mix the flour, ground walnuts, cinnamon
and baking powder in a separate bowl.
Add to the moist ingredients and mix
in. Using a spatula carefully mix in the
beaten egg whites.
■ Line a rectangular loaf tin (dimensions
35 cm x 11 cm) with greaseproof paper
and pour in the prepared mixture.
■ Peel the apple and slice. Arrange the
slices on the cake.
■ Preheat the oven to 180 ºC and bake
the cake for 30 minutes.
honey-apple
Whisk
For whipping cream, beating egg whites
and milk froth from hot milk (max. 70 °C)
and cold milk (max. 8 °C) as well as for
making sauces and desserts.
W Risk of scalding!
When processing hot liquids, use a tall, thin
blending receptacle.
Warning!
– Never insert the whisk into the base unit
without the gear attachment.
– Do not attach or remove the gear
attachment with the whisk until the
appliance is at a standstill.
X Fig C
1. Place the prepared food in the blender
jug or other suitable receptacle or
process in the pan used for cooking.
2. Place the gear attachment on the whisk
and press until it clicks into position.
3. Place the whisk with the gear
attachment on the base unit and press
until it clicks into position.
4. Connect the mains plug.
5. Set the required speed with the speed
control (high speed recommended)
6. Take hold of the base unit and blender
jug and press the On button Ã.
7. Process the food with the whisk.
8. Release the button after processing.
Wait until the drive comes to a standstill.
9. Disconnect the mains plug.
10. Hold down both release buttons
and remove the whisk with the gear
attachment from the base unit.
11. Remove the gear attachment from the
whisk.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 10
Whisk en
9