Other Functions; Activating Security Code; Deactivating Security Code - Kenwood DPX503 Mode D'emploi

Other Functions

Activating Security Code

⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Security Code item during Menu
mode (In Standby mode)
"Security Set" is displayed.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "SECURITY SET" is also
displayed.
3
Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
4
Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "SECURITY SET" is also
displayed.
5
Do the step 3 through 4 operation, and reenter
the Security Code.
"Approved" is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 3 through 4, repeat
from step 3.
6
Exit Security Code mode
Press the [FNC] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1
Turn the power ON.
2
Do the step 3 through 4 operation, and enter
the Security Code.
"Approved" is displayed.
Now, you can use the unit.
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.

Deactivating Security Code

To deactivate the Security Code function.
1
Select Security Code item during Menu
mode (In Standby mode)
Select the "Security Clear" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "SECURITY CLEAR" is also
displayed.
3
Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
4
Press the Control knob for at least 3 seconds.
"Clear" is displayed.
The Security Code function deactivates.
5
Exit Security Code mode
Press the [FNC] button.
⁄
• If a wrong security code is entered, "Error" is displayed.
Enter a correct security code.
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.
17
|
English