Manual Clock Adjustment; Date Adjustment; Demonstration Mode Setting - Kenwood DPX503 Mode D'emploi

Other Functions

Manual Clock Adjustment

1
Select Clock Adjustment item during Menu
mode
Select the "Clock Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Clock adjustment mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjusting Clock
Operation type
Selecting the item (hours or
minutes)
Adjust each item
4
Exit Clock adjustment mode
Press the [FNC] button.
⁄
• You can do this adjustment when "MENU" > "SYNC" in
<Function Control> (page 6) is set to "OFF". (DPX503
only)

Date Adjustment

1
Select Date Adjustment item during Menu
mode
Select the "Date Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Date adjustment mode
Press the Control knob for at least 1 second.
The date display blinks.
3
Adjusting Date
Operation type
Selecting the item (month, day,
or year)
Adjust each item
4
Exit Date adjustment mode
Press the [FNC] button.
18
|
DPX503/DPX303
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.

Demonstration mode setting

Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the "DEMO Mode" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between "ON" and "OFF".
3
Exit Demonstration mode
Press the [FNC] button.