Kenwood DPX503 Mode D'emploi page 7

Category Item Setting
"OPENING MSGE
Edit"
"DEMO Mode" "OFF"/ "ON"*
1
SOUND* "S-SET" "CABIN" "Compact1" etc.
"DTA"
"XOVER"
"S-CTRL" "EQ"
"POSIT"
"LOUD" "OFF"*/ "ON"
"PRESET"
DISP "TYPE" A/ B/ C/ D
"GRAPH" Spectrum Analyzer 1 – 2
"SIDE" Text icon/ Source
icon/ OFF
"TEXT"
Color* 1
P.MEM
3
SCAN* "ON"/ —
RDM "ON"/ —
FiREP "ON"/ —
FoREP "ON"/ —
SCAN "ON"/ —
RDM "ON"/ —
M.RDM "ON"/ —
T.REP "ON"/ —
D.REP "ON"/ —
Displayed item is depending on currently selected
source or mode. The mark in Condition column shows
the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during FM reception.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby source
Entry Setting overview
1 sec. Sets the opening message displayed when the power is
turned on.
2 sec. Specifies whether to enable demonstration.
Selects the car type to compensate the distance difference
between each speaker.
Makes fine adjustment of the compensation value specified
at Cabin.
Makes fine adjustment of the X'Over value specified at
Speaker.
Sets the sound quality.
Compensates the sound environment in accordance with
the listening position.
Compensates high and low pitch sound at lower volume.
Presets the setting value of the audio control. The preset
value is retained after resetting.
Sets the display pattern.
Sets the Type D spectrum analyzer display.
Sets the Type A/B side icon display.
Sets the text display.
Sets the Panel illumination color.
Presets a station.
When set to "ON", plays the intro of the music in the folder
successively.
When set to "ON", plays the music in the folder randomly.
When set to "ON", plays the music repeatedly.
When set to "ON", plays the music in the folder repeatedly.
When set to "ON", plays the intro of the music on the disc
successively.
When set to "ON", plays the music on the disc randomly.
When set to "ON", plays the music in the disc changer
randomly.
When set to "ON", plays the music repeatedly.
When set to "ON", plays the music on the disc repeatedly.
Å–Î
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to set
the items with reference page number.
• Only the items available to the current source are displayed.
• Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned ON. In such a
situation, turn it OFF.
by setting "2 ZONE" of <Audio Setup> (page 23) to
"ON".
: Sets "ILM MSC SYNC" and "AT COL CHG" in the menu
to "OFF".
: Refer to the reference page.
: Can be set when the specified type is selected for
Display Type.
Condition Page
12
— 18
19
/30
19/30
20
20
20
/21
21
— 8
Î
Åı
ÅıÇ
9
10
15
*Factory setting
*1 Function of DPX503.
*2 Function of DPX303.
Next page 3
7
|
English