Other Settings - Kenwood KDC-BT48DAB Mode D'emploi

DIGITAL RADIO (DAB)
• To store a service: Press and hold one of the number buttons
(1 to 6).
• To select a stored service: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Select a service
1
Press to enter Service Search mode.
Turn the volume knob or press J / K to select a service, then
2
press the knob.
(or using RC-406)
Press J / K to search for a service.
To cancel the Service Search mode, press
Select a service by name
1 Press to enter Service Search mode.
2
Turn the volume knob quickly to enter Alphabet Search
mode.
Turn the volume knob or press S / T to select the
3
character to be searched for.
Press J / K to go to the previous/next page.
4 Press the volume knob to start searching.
5
Turn the volume knob to select a service, then press the knob.
To cancel the Alphabet Search mode, press
6
Replay
Press and hold K SEEK (or press K on RC-406).
"REPLAY MODE" appears and replay starts from the live position. You can replay
a certain length of time of the current service (depending on the audio bit rate).
During Replay...
• To pause or resume playback, press 6 IW (or press ENT IW on RC-406).
• To skip the current song backward/forward, press S / T (or press
S / T (+) on RC-406).
• To rewind/fast-forward, press and hold S / T (or press and hold
S / T (+) on RC-406).
• To exit from Replay and go to live, press and hold K SEEK (or press and hold
K on RC-406).
.

Other settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3
Press and hold
To return to the previous setting item or hierarchy, press
TUNER SETTING
AF SET
.
TI
PTY SEARCH
to exit.
ON:
While listening to DAB...
Automatically switch to FM broadcasting the same program if the DAB signal becomes
weak. It will switch back to DAB sound when the signal becomes strong again.
While listening to FM...
Automatically switch to DAB source broadcasting the same program (if available). ;
OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
Press the volume knob to enter PTY language selection. Turn the volume knob to
select the PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.
Selects the available Program Type ( 7), then, press S / T to start.
.
Default: XX