Specifications - Kenwood KDC-BT48DAB Mode D'emploi

Symptom Remedy
Sound is being • Reduce the distance between the unit and the Bluetooth
interrupted or skipped audio player.
during playback of a • Turn off, then turn on the unit and try to connect again.
Bluetooth audio player. • Other Bluetooth devices might be trying to connect to
the unit.
The connected • Check whether the connected Bluetooth audio player
Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP).
cannot be controlled. (Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
• "HF ERROR XX" Reset the unit and try the operation again. If this does
appears. not solve the problem, consult your nearest service
• "BT ERROR" appears. center.
TROUBLESHOOTING

SPECIFICATIONS

DAB Frequency Range
Sensitivity
Signal-to-Noise Ratio
Antenna Connector Type
Antenna Output Voltage
Antenna Maximum Current
FM Frequency Range
Usable Sensitivity
(S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio
(MONO)
Stereo Separation (1 kHz)
MW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
LW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
L Band 1 452.960 MHz — 1 490.624 MHz
Band III 174.928 MHz — 239.200 MHz
–100 dBm
80 dB
SMB
14.4 V (11 V – 16 V)
< 100 mA
87.5 MHz — 108.0 MHz (50 kHz space)
9.3 dBf (1 μV/75 Ω)
10.2 dBf (1.13 μV/75 Ω)
30 Hz — 15 kHz
75 dB
45 dB
531 kHz — 1 611 kHz (9 kHz space)
28 dBμV (25 μV)
153 kHz — 279 kHz (9 kHz space)
33 dBμV (45 μV)
ENGLISH | 21