Specifications - Kenwood KMM-BT332U Mode D'emploi

Troubleshooting
Symptom
Not able to connect or • Be sure the audio device is connected via Bluetooth.
reconnect to Alexa mobile
application.
• Perform the one-time setup process again. See "Setup for
• Turn off, then turn on the unit and try to connect again.
• For iOS device, make sure Alexa source or iPod BT source
Not able to exit from
"TALKING" screen after
ending the call.
Not able to go to • Disconnect and connect the Bluetooth connection again.
"LISTENING" screen after
activated Alexa. • Disconnect and connect the Alexa connection again.
• Turn off the unit for about 10 seconds, then turn on the
Remedy
Select the audio device from [AUDIO SELECT] in
[BT MODE]. (Page 18)
the first time" on page 20.
is selected.
It may take some time for the unit to exit the "TALKING"
screen. Press number button 6 to return to the previous
source control screen.
(Page 15)
(Page 20)
unit and try again.

Specifications

FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3.0 dB) 30 Hz — 15 kHz
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
AM Frequency Range
Usable Sensitivity
(S/N = 20 dB)
USB Standard
File System
Maximum Supply Current
Frequency Response (±1 dB)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
MP3 Decode
WMA Decode
AAC Decode
WAV Decode
FLAC Decode
87.9 MHz — 107.9 MHz (200 kHz step)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
64.0 dB
40 dB
530 kHz — 1 700 kHz (10 kHz step)
29 dBμ (28.2 μV)
USB 1.1, USB 2.0 (High speed)
FAT12/16/32
DC 5 V 1.5 A
20 Hz — 20 kHz
98 dB
90 dB
92 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
AAC-LC ".aac", ".m4a" files
Linear-PCM
FLAC file (Up to 96 kHz/24 bit)
ENGLISH
35