Change The Display Information; Troubleshooting - Kenwood KMM-BT332U Mode D'emploi

References

Change the display information

Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information
(eg. station name) appears or display will be blank.
Clock time
Source name Display information: Main display
STANDBY Source name Date
RADIO Frequency Date
For FM Radio Broadcast Data System stations only:
Station name/Program type
song title/Radio text+ artist
beginning
USB For MP3/WMA/AAC/WAV/FLAC files:
Song title/Artist
Playing time Date
iPod USB/iPod BT Song title/Artist
the beginning
SIRIUS XM Channel number
information Category name
BT AUDIO/ALEXA Song title/Artist
the beginning
AUX Source name Date
32
ENGLISH
Main display
back to the beginning
back to the beginning
Radio text Radio text+ Radio text+
Frequency Date back to the
Album title/Artist Folder name File name
back to the beginning
Album title/Artist Playing time Date
Channel name Artist Song title Content
Date back to the beginning
Album title/Artist Playing time Date
back to the beginning

Troubleshooting

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Correct characters are not
displayed.
• Radio reception is poor.
back to
• Static noise while listening
to the radio.
Playback order is not as
intended.
back to
Elapsed playing time is not
correct.
"READING" keeps flashing.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Clean the connectors. (Page 31)
Reset the unit. (Page 3)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Connect the antenna firmly.
USB device, the folders are played in the order of creation
(date and time). The files within each folder are played in
the order of the file name (alphabet).
This depends on the recording process earlier (USB).
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB/iPod/iPhone).