Getting Started - Kenwood KDC-BT48DAB Mode D'emploi

GETTING STARTED

1
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1 Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then
press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB"
2 Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold to exit.
To return to the previous setting item or hierarchy, press
4
3
Set the initial settings
1 Press B SRC to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Press and hold
To return to the previous setting item or hierarchy, press
AUDIO CONTROL
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain
as [COLOR SELECT] color. ( 18)
TUNER SETTING
DAB L-BAND
ON: Receives L-BAND ensemble during digital audio reception. ;
OFF: Cancels.
DAB ANT
ON: Supplies power to the DAB antenna. Selects when using the supplied
POWER
antenna. ; OFF: Does not supply power. Selects when using passive
antenna without booster. ( 25)
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3). ; MIX: Memorizes one station
for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
.
to exit.
.
Default: XX