Panasonic DVD-S77 Manuel D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

∫ Display Menu
On ,------. Off
Information
([JPEG] Off/Date/Details)
0 to s60 (in 2 units)
Subtitle Position
Auto, 0 to s7
Subtitle Brightness
To select how to show images made for 4:3 aspect screens on
a 16:9 aspect television
Normal: Laterally stretches images.
4:3 Aspect
Auto:
The standard setting is "Shrink". However, this
automatically changes to "Zoom" with a letterbox picture.
Shrink: Images appear in the center of the screen.
Zoom:
Expands to 4:3 aspect ratio.
Just Fit Zoom
(
page 14, Zoom)
Manual Zoom
(
page 14, Zoom)
[RAM] [DVD-RW[‹VR›] [DVD-V]
Bit Rate Display
On ,------. Off
On ,------. Off
GUI See-through
s3 to r3
GUI Brightness
Indicates various information when connected with HDMI AV OUT
HDMI Status
terminal (
below, Confirming HDMI information).
∫ Confirming HDMI information
Connection status
HDMI Status----- HDMI is connected.
HDMI Information
Audio Stream
PCM/Dolby Digital/DTS
Max Channel
6ch
Video Format
480p/720p/1080i
Color Space
YCbCr(4:4:4)/YCbCr(4:2:2)/RGB
≥All possible outputs are displayed.
≥The current output for "Audio Stream", "Video Format" and "Color Space" will be
underlined.
≥When "Off" is selected in "HDMI Audio Output" (
be displayed in "Audio Stream" and "Max Channel".
[VCD]
page 13, Changing soundtracks
Shows the maximum
channel number of the
connected equipment.
page 16,
Video Output Mode
page 16, HDMI Color Space
page 21, "HDMI" tab), "– – –" will
∫ Other Menu
,.30 min,.60 min,.90 min,.120 min
§
Auto
^-------------------------. Off ,------------------------J
§
Auto:
Turns the unit off 5 minutes after play finishes.
Sleep
– Also works with DVDs that show a menu after play finishes.
– Does not work if you stop play or show a disc menu. It is
activated again when you restart play.
≥When "30 min"–"120 min" is set, the remaining time will be displayed.
To preset the settings
You can preset your favorite video/audio effects onto "User1",
"User2" and "User3".
Preparation
Adjust the settings indicated below to your preference.
(When "Auto" is selected, this is not available.)
Audio settings:
Multi Re-master (
Advanced Surround/Dialogue Enhancer (
Video settings:
Picture Mode (
Gamma/Depth Enhancer (
Contrast/Brightness/Sharpness/Color (
MPEG DNR/3D-NR (
AV Enhancer
pictures)
1. Select "Save Settings" and press [ENTER].
2. Press [34] to select the setting location (User1, User2 or
User3) and press [ENTER].
3. Follow the instructions on the menu screen and press
[ENTER] last.
To recall the settings
audio/video setting—AV Enhancer)
To confirm the settings
1. Press [34] to select "User1", "User2" or "User3" and
press [ENTER].
2. Select "Save Settings" and press [ENTER] twice.
To exit the screen, select "No" and press [ENTER].
Setup
(
page 20, Changing the player settings)
Play as DVD-Video
Select "Play as DVD-Video" to play DVD-Video contents on
or
DVD-Audio.
Play as DVD-Audio
Play as DVD-VR
Select "Play as Data Disc" to play JPEG content on DVD-
Play as HighMAT
RAM or to play a HighMAT disc without using the HighMAT
or
function.
Play as Data Disc
page 12)
page 16)
page 16)
page 16)
page 13)
page 14, Reducing noise in
(
page 12
, Recalling recommended
17
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières