Sony HT-CT500 Mode D'emploi page 28

Connecting a Blu-ray Disc player (recorder), "PlayStation 3",
DVD player (recorder), satellite tuner, cable television tuner,
etc.
Blu-ray Disc player (recorder),
"PlayStation 3"
Audio/video signal
Rear of the
subwoofer
Notes on HDMI connections
• Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p or Deep Color images may
not be displayed properly.
• Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
• Check the setup of the connected component if an image is poor, or sound does not come out of a
component connected via the HDMI cable.
• Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be
suppressed by the connected component.
• Sound may be interrupted when the number of channels or sampling frequency of audio output
signals from the playback component is changed.
• When the connected component is not compatible with copyright protection technology (HDCP), the
image and/or the sound from the HDMI TV OUT jack may be distorted or may be not output.
In this case, check the specification of the connected component.
• Sony does not recommend using an HDMI-DVI conversion cable.
• When TV or tuner input is selected, the video signal that was selected last time is output.
28
US
DVD player (recorder)
Audio/video signal
A A
BD IN
ONLY FOR SS-CT500
L
CENTER
R
DC 5V
0.7A MAX
SPEAKER
DMPORT
A HDMI cable (not supplied)
FM
75 COAXIAL
EZW-T100
DVD IN SAT/CATV IN TV OUT
OPTICAL COAXIAL
TV IN VIDEO 2 IN VIDEO 3 IN VIDEO 3 IN
DIGITAL
VIDEO IN COMPONENT VIDEO IN
Y
ASSIGNABLE
P
L L
B
C
B
ONLY FOR
P
R
SS-CT500
C
R
R R
AUDIO IN AUDIO IN
REMOTE
TV VIDEO 1 VIDEO 2 VIDEO 3
CTRL
Satellite tuner, cable television
tuner
Audio/video signal
AM
ANTENNA
HDMI
/
/
: Signal flow
A