Malfunctions - Konig & Meyer Omega-E Mode D'emploi

7.

Malfunctions

IMPORTANT Observe the safety chapter
Observe the basic safety instructions in Chapter 2, "Safety in-
structions".
Malfunction
Keyboard table is
wobbly
Keyboard table does not
move
Keyboard table only
moves in one direction
Control panel does not
work
Drive is making unusual
noises.
An error code is being
displayed on the control
panel
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
Cause/remedy
Check underlying surface.
Check bases.
Check screw connections and tighten if neces-
sary (observe maximum tightening torque).
Check whether all the cables are plugged in
correctly (and that there is power).
Ensure that the load on the table is not exces-
sive.
Ensure that no obstacles are blocking the
movement path.
The control unit/panel is defective. Please
contact König & Meyer GmbH & Co. KG
The control unit/panel is defective. Please
contact König & Meyer GmbH & Co. KG
Check whether the cable is plugged in correctly
– if necessary, pull out the plug and plug it in
again.
Reset the control panel to the factory default.
(For instructions, see the "Control panel"
chapter)
Control panel defective. Please contact König &
Meyer GmbH & Co. KG
Drive defective - pull out the power plug.
Please contact König & Meyer GmbH & Co. KG
Please consult the error code list in the appen-
dix.
Malfunctions
7
General
information
Malfunctions
35