Service, Cleaning, And Maintenance; Maintenance And Cleaning - Konig & Meyer Omega-E Mode D'emploi

6.

Service, cleaning, and maintenance

IMPORTANT Observe the safety chapter
Observe the basic safety instructions in Chapter 2, "Safety in-
structions".
Ü
Ü
Ü
Ü
6.1

Maintenance and cleaning

WARNING Risk of injury due to disregarding manufacturer specifi-
cations
Disregarding the specifications of the manufacturer can impair
the function of the keyboard table.
When cleaning, observe all applicable environmental protection
regulations.
Chlorinated and corrosive cleaning agents are not permitted.
No liquids may get into the system (control unit, control panel,
cables, and frame).
Maintenance and cleaning
Remove dust and dirt from the outside of the keyboard table
at regular intervals and ensure that no damage or cracks are
present. Check the connections, cables, and plugs and ensure
that the function correctly.
Ü
Ü
Cleaning and disinfection agents may only be used if
they have a pH of 6 - 8 (i.e. no highly alkaline or acidic
agents).
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
Service and maintenance
Maintenance work may only be carried out by qualified
personnel.
Observe all general accident prevention regulations and
the VDE guidelines!
Carry out the prescribed setting, maintenance, and ser-
vice work in a timely manner!
Exchange defective keyboard table parts as quickly as
possible!
Pull out the power plug before any service/maintenance
work.
First clean the unit only with a cloth, brush, or vacuum
cleaner, then with an only slightly moistened cloth.
6
General
information
General
information
Maintenance
and cleaning
32