Konig & Meyer Omega-E Mode D'emploi page 103

Ü
Do not fasten the Velcro straps and cable clips to the column
drawers!
CAREFUL
Ü
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
D
Attach the Velcro strap, power adapter, and cable
clip.
Thread the first Velcro strap through the slit in the re-
taining plate à Place the power adapter on the retain-
ing plate and fasten. Attach the remaining Velcro straps
and cable clips to the keyboard table using the cable
clamp.
Wire.
Connect the master and slave columns with the motor
cable à Connect the control panel à Connect the power
adapter to the master column with the connection cable
à Connect the power cable to the power adapter with
the correct plug.
Assembly
D
3
18