Starting Operation/Operation; Using The Control Panel (Dpg1C); Mode Of Operation - Konig & Meyer Omega-E Mode D'emploi

Ü
Ü
Ü
Ü
5.2

Using the control panel (DPG1C)

The DPG1C is a control panel with the following application op-
tions:
-
-
-
-
-
-
5.2.1

Mode of operation

The control panel is activated by means of a toggle switch.
Press and hold the DPG1C upwards to lift the keyboard table;
press and hold the DPG1C down to lower the keyboard table.
Let
you
desired
Figure 1: Press and hold the DPG1C to lift the keyboard table.
Figure 2: Press and hold the DPG1C to lower the keyboard table.
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
Starting operation /operation
If the lifting column produces unusual sounds or odors
during operation, disconnect the power.
Ensure that the cables are not damaged.
Pull the plug on mobile applications before moving
them.
The keyboard table may only be used in an environ-
ment that corresponds with its protection class.
Up/down function
4 height memory positions
3 reminder intervals (suggestion to change positions
between sitting and standing)
Bluetooth®
Display (of table height, etc.)
Use of the keyboard table via app
the
have
DPG1C go when
reached the
position.
5
General
information
Mode of
operation
Store memory
positions
23