Konig & Meyer Omega-E Mode D'emploi page 110

The DPG1C stops at all prestored positions, which means that
the table will move between up to 4 different positions. When
the keyboard table stops at a prestored position, the user can
tilt the DPG1C for one second, and the keyboard table will
travel past the prestored position in the direction he is pressing.
When the keyboard table stops at a prestored position, the user
can let go of the DPG1C and press it again in order to travel
past the memory position.
Moving to memory positions
(Automatic movement activated via the Desk Control™
app)
After storing the memory positions, you can move to them eas-
ily by tilting the DPG1C. By pressing the DPG1C twice, the key-
board table moves automatically to the first position in the tilt
direction. Simple press the DPG1C again to stop the keyboard
table.
Figure 3: Press twice to move the keyboard table automatically to a prestored
position.
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
Starting operation /operation
5
Delete
memory
positions
25