Installation; Built-In Installation Of Single Appliance; Built-In Installation Of Two Or More Appliances - Fhiaba Integrated Serie Notice D'installation

6. INSTALLATION

IMPORTANT: The following instruction for installation apply to all Fhiaba models.
6.1 Built-in installation
single appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets, special
side profiles and aluminum covering frames are
already factory installed.
Operate as follows:
>
Push the appliance into the installation niche
1
> If the unit is to be installed inside a niche or
within an enclosed structure, it is necessary to
provide air flow at the back of the niche to assure
proper ventilation at the back of the unit. A 5 mm
gap is sufficient to prevent overheating. Always
mount front panels on door and drawer before
pushing the unit into its final position inside the
niche or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets
by fixing to these the side profiles factory-in-
stalled on the appliance
included with the appliance that are installed by you.
To make this operation easier keep the door and
the drawer open.
2
> Mount the profiles the trim covers: first insert
them laterally (a) and then push firmly (b) until a
"click" is heard [ 3 ].
30 www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
[ 1 ].
[ 2 ] or the plastic brackets
3
Side profiles mounting:
6,5 (¼")
Appliance
22 ( ⁄ ")
Wall or furniture
A Profile connection trim (screws for fixing to
cabinetry not included)
brackets
B Profile trim cover
6.2 Built-in installation two or more
appliances
Required accessories to be ordered separately:
> Central connection Kit (KCC)
Special side profiles and aluminum cover-
ing frames are provided for closing gaps
between the appliance and the adjacent
cabinets.
Operate as follows:
> Position the appliances in front of the installation
area, leaving enough space to access behind them
[ 1 ].
1
C
6,5 (¼")
A
B
22 ( ⁄ ")
C plastic connecting