Levelling; Niche Dimensions; Niche Dimensions And Installation Styles: Integrated Series - Fhiaba Integrated Serie Notice D'installation

> Firmly tighten with fingers - a tool / wrench should
not be needed to make a proper seal. Turn on the wa-
ter and ensure all connections are not leaking prior
to pushing the unit into the niche.

3.4 Levelling

Adjust the appliance level by means of the front
levelling feet and the rear adjustable wheels.
2
1
Operate as follows:
> If necessary, remove the bottom plinth or grille
(it is kept in position by magnets), adjust the
height of the levelling feet
mm (11/16") wrench.
> Then adjust the height of the rear wheels by
turning the front adjusting bolts
(raise) or counter-clockwise as it may be re-
quired.
Take care if using a power driver for this and
lower the clutch to prevent damaging the leveling
mechanism.
> Remount the bottom plinth or grille.
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
2
1
[ 1 ] by means of a 17
[ 2 ] clockwise

4. NICHE DIMENSIONS

4.1 Niche Dimensions and Installation
Styles: Integrated Series
FI36: 902 (35 ½")
FI30: 752 (29 ⅝")
FI24: 602 (23 ¾")
FI18: 452 (17 ¾")
Series Niche
FI36 902 (35 1/2")
FI30 752 (29 5/8")
FI24 602 (23 3/4")
FI18 452 (17 3/4")
A - KCLITU: Lateral connection Kit (included)
B - KCCITU: Central connection Kit for joining two
bottom-compressor models (not included - must
be ordered as a separate accessory)
C B
EN
Panels Width
897 (35 1/4")
747 (29 3/8")
597 (23 1/2")
447 (17 1/2")
C
15