dirna Bergstrom bycool FLAT Instructions De Montage page 24

FLAT
EN
13
Position the interior air distribution panel on the
front studs with (1) M6 wide-rimmed washer and
(1) M6 nut on each stud. Tighten the nuts until the
ducts come up against the unit's upper foam.
Important: Air ducts must touch foam gasket to
avoid air leaks.
13
EPDM
Gasket
Cabin roof
Upholstey
14
Tighten nut (A) of the schematic against the top
part of the interior air distribution panel.
14
EPDM
Gasket
Cabin roof
Upholstey
Unit base
height A
Nut M6
Unit base
Nut M6 (A)
Nut M6
Air ducts
Foam
24
13
Foam
Interior air distribution
panel
14
®