Technical Data; Hotpress Hp01 With Programmable Controller - BEHAbelt HP01 Mode D'emploi

3.0 Technical Data

3.1

Hotpress HP01 with programmable controller

The handy and double-sided heated hotpress HP01 with controller is especially suitable
for precise joining of PU and Polyester belts.
The hotpress is perfectly suited for the accurate welding of small profi les.
With its small size the instrument is manageable and space saving and can be operated
directly within a conveyor machine.
The custom removable mould stands out the with new hotpress as well. The prepared
endings of the profi les are inserted within the mould, the top of the mould is closed and
is inserted within the press.
For the adjustment of the height and bonding pressure the spring-loaded top force is
adjusted manually with the star handle.
There are different cooling times, because of the possibility of cooling with water or air.
Technical data:
Hotpress HP01
Max. bandwidth
Length of the heater
Temperature
adjustment
Temperature range
Total length
Overall width
Height
Slight notch
Weight hotpress
Voltage
Press capacity
Heating-up period
Cooling-down time
(water)
Cooling-down time (air) approx. 25 min
Profi le acceptance
30
120mm
60mm
continuously variable
0°...350°C
approx. 170mm
approx. 120mm
approx. 240mm
5...80mm
approx. 4,6kg
Version 230 V/
Version 115 V
2x 600W
approx. 3...5 min
approx. 3 min
with mould
Measurements PPuls Controller
Length
Width
Height
Weight of Controller
200mm
100mm
45mm
approx. 0,9kg