AYA ATV3F Instructions D'utilisation page 48

A
B
C
D
A(mm) B(mm) C(mm) D
760 50 mini 20 mini Air intake Air exit 5mm
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In
order to avoid accidental touch with the overheating bottom of the hob, or getting
unexpectable electric shock during working, it is necessary to put a wooden insert, fixed by
screws, at a minimum distance of 50mm from the bottom of the hob. Follow the requirements
below.
There are ventilation holes around outside of the hob. YOU MUST ensure
these holes are not blocked by the worktop when you put the hob into position.
 Be aware that the glue that join the plastic or wooden material to the furniture, has to
resist to temperature not below 150℃, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to withstand

an temperature of 90℃.
E
E
EN-20
Min.30mm