AYA ATV3F Instructions D'utilisation page 43

b) Setting the timer to turn one cooking zone off
Touch the or
want to set the timer for.
Set the time by touching the or control of the timer .
Touching the "-" and "+" together, the timer is cancelled, and
the "--" will show in the minute display.
When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator will flash for 5 seconds.
When cooking timer expires, the corresponding cooking
zone will be switched off automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) If you want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an
excessive temperature is monitored, the ceramic hob will stop operation automatically.
3.3.7 Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter
" H "appears to warn you to keep away from it.
of the corresponding cooking zone you
Set one zone
EN-15