Christopeit Sport TE 1 Notice De Montage Et D'utilisation page 13

Step 3:
Attach the rope for ankle strap (57).
1. Attach the ring bracket (12) at highest position of rear foot (3) in right
position, so that you can put in the D shape ring (45) from above into the
ring bracket (12).
Secure the ring bracket (12) with locking pin 2 (46) at rear foot (3).
2. Hang in the pulley bracket 1 (9) of the rope for ankle strap (57) from
above into the D shape ring (45) and put the D shape ring (45) into the
ring bracket (12).
The rope for ankle strap (57) must come out on top of the pulley.
3. Connect the rear end of rope for ankle strap (57) with carbine hook (54)
at roller slide.
(Attention: Only one rope has to connect with the roller slide to avoid a
tangling of ropes and disturb of exercise.)
Step 4:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
13