SilverCrest SMPS 7 B2 Mode D'emploi page 14

■ Felt cone
For smoothing and polishing nail edges after filing, and for cleaning
the nail surface.
♦ Use the felt cone
and to clean the nail surface after grinding. Always polish in a
circular motion and never let the felt cone
■ Sapphire disc
For filing and working the nails.
Work the edge of the nail using the sapphire disc
the inner disc rotates and the outer edge does not move, you can file
your nails accurately without damaging your skin with the rapidly
rotating disc.
♦ Always work from the outside of the nail to the tip.
■ Flame miller
For grinding off thick toenail surfaces and rough smoothing of the
surfaces.
You can use the flame miller
♦ Always hold the flame miller
and use light pressure and circular movements to grind off the
surface.
■ Cylindrical miller
You can use the cylindrical miller
♦ Carefully guide the cylindrical miller
and remove the affected parts of the nail.
SMPS 7 B2
:
11
to polish and smooth the edge of the nail
11
/ :
12 13
:
14
:
15
to grind off thick nail surfaces.
14
parallel to the nail surface
14
to free ingrowing toenails.
15
to the treatment area
15
stay in one place.
11
. Since only
12 / 13
GB │ IE │
11 ■