Philips HD6104 Mode D'emploi page 8

ENGLISH
8
- When the preset time has elapsed you will hear an audible signal. After 10 seconds the audible
signal will be repeated.You can stop the audible signal by pressing the timer button.
Note: you can erase the timer setting by pressing the timer button for 2 seconds (at the moment the
B
timer blinks) until '00' appears.
After frying
1 Fold out the handle of the basket (fig. 8).
2 Open the lid (fig. 2).
Beware of the hot steam.
3 Remove the basket from the fryer and shake off excess oil or fat.
4 Put the fried food in a bowl containing grease-absorbing paper.
5 Enjoy the fried food!
If you want to fry another batch, wait until the temperature light has gone out.
6 Unplug the appliance after use.
If you do not use the fryer regularly, we advise you to remove the oil or liquid fat and to
store it in well-closed containers, preferably in the refrigerator or in a cool place.
Cleaning
Let the oil or fat cool down for at least 4 hours before cleaning or moving the fryer.
Do not use any abrasive (liquid) cleaning agents or materials (e.g scouring pads) to clean the
appliance.
Never immerse the fryer housing or the timer in water.
1 Open the lid (fig. 2).
2 Remove the lid by pulling it upwards (fig. 13).
3 Lift the frying basket out of the fryer (fig. 9).
4 Pour out the oil or fat (fig. 14).
PreClean function
This appliance is equipped with a PreClean function, which offers you the possibility to soak the
inner bowl with hot water and washing-up liquid to allow easier cleaning.
Make sure the oil or fat has been removed from the inner bowl before you use this function.
1 Fill the inner bowl with cold water up to three quarters of its capacity and add some
washing-up liquid (fig. 15).
2 Put the plug in the wall socket.
3 Set the temperature control to the PreClean function.
The water will be heated to a temperature just below boiling point.
4 Unplug the appliance after 20-30 minutes.
5 Pour the water out of the inner bowl and clean it as described below.