Instructions for use
6567460 D3643.201.01.03.02
Procedure
With W&H Service Oil F1, MD-400
ü
The spray adapter is disinfected.
1.
Fit the spray cap with the nozzle onto the spray can.
2.
Shake the spray can before each application.
3.
Insert the nozzle into the Instrument.
4.
Hold the instrument firmly.
5.
Spray the instrument for about 1 second.
IMPORTANT: Hold the spray can upright.
6.
Wipe any spray that comes out with a disinfection cloth.
7.
Repeat the process until the spray that runs out is clear.
With W&H Assistina
➢
Observe the instructions for use of the manufacturer.
7 Reprocessing
41