AEG SRR 4319 Mode D'emploi & Garantie page 55

Random playback (RAND) always
begins with the fi rst track on the
CD.
Press four times = all functions are cancelled. The
normal play mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated
continuously (
display).
Press twice = the selected folder of the MP3 CD
is repeated continuously (
ALBUM appears in the display). Use
the ALBUM UP button (18/4) to
select individual folders.
Press three times = the whole CD is played continuously
(
Press four times = the display contains the word RAND,
MP3 and the track number that is to
be played fi rst. All tracks are played
back in random order.
Press fi ve times = the function is deactivated and the
CD is played in the normal mode.
FOLDER UP (20/2)
Press this button during playback to change to a higher
folder. The display, e.g. ALBUM 001, fl ashes briefl y. Then
the CD begins to play back automatically. If the button is
pressed in stop mode the display also fl ashes. Then start
playback with the PLAY/PAUSE/USB/SD button.
+10 TRACK (3 on the remote control)
Press this button to jump forwards 10 tracks at a time
(provided that there are more than 10 tracks stored on
the CD).
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key (21/1).
2. Press the PRO(GRAM) key (19/5). The number „P01"
(storage location) and the symbol PROG fl ash in the
display. Use the SKIP+/SKIP- buttons (26/24/6) to se-
lect the desired track and then press the PRO(GRAM)
button again. The display changes to memory slot
P02.
NOTE:
In the case of CDs in MP3 format that contain fol-
ders, when the device changes to a diff erent folder
001 appears for the fi rst track of the new folder.
05-SRR 4319 CD_MP3.indd 55 05-SRR 4319 CD_MP3.indd 55
NOTE:
appears in the
ALL appears in the display).
3. Select the next track with the SKIP+/SKIP- key and
press the PRO(GRAM) key again. Repeat the procedu-
re until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be
programmed has been reached, „FUL" fl ashes in the
display.
4. Press the PLAY/PAUSE/USB/SD key (23/7). The play-
back starts. The fi rst track number selected appears
in the display and or
Press this button to pause briefl y the playback.
5. Press once the STOP key to stop the playback while
retaining the program.
6. To resume the playback of the program press fi rst the
PRO(GRAM) key once and then the PLAY/PAUSE/USB/
SD key.
7. In order to delete the programme, fi rst press the
PRO(GRAM) button in stop mode and then the STOP
button. The PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes off and the programmed order of tracks is
deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(20/2) up to three times and then you can use the func-
tions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (the total number
of tracks and MP3s appears in the display). If you would
like to play one of these CDs, proceed as described under
„Playing CDs/MP3". Tracks can be programmed as descri-
bed under „Playing Back Programmed Tracks".
Please note:
There are a number of diff erent recording and compres-
sion methods, as well as quality diff erences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.
English
55
MP3 and PROG. light up.
14.01.2008 10:25:41 Uhr 14.01.2008 10:25:41 Uhr