Publicité
Les langues disponibles
Les langues disponibles
EN
FIRST WASHING
Every Machine has been tested by the manufacturer, therefore, a little amount of water may remain in
the Machine. To clean the Machine from inside and remove the water that might remain after tests, perform
the fist washing cycle without any items.
Make your first washing by setting the Wash Program Selector Knob to the mark
temperature to 90 ºC.
ATTENTION! For the first washing, add 1/2 of the recommended dose of washing powder (deter-
gent) into compartment 2 of the dispenser drawer (Fig. 15), making account of the manufacturer's
guidelines as to the maximum items loading.
PREPARATION AND LOADING OF ITEMS
Prior to start washing:
- sort out the items, having separated the coloured ones from the white ones;
- distribute the items according to the fabric care labels;
- check that the pockets of your items of clothes be empty, the damaged and torn parts be repaired, and
zippers, belts, buckles and hooks be closed or locked, and all the hard-removable spots be removed in advance;
- be sure to shake all the sand out of the clothes (pockets, cuffs);
- turn the items with applications attached inside out.
ATTENTION! Penetration into the Machine of metal objects (coins, clips) together with clothes
may be a cause of damage of the rubber gasket and plastic drum of the Machine.
Prior to washing, put small items (socks, handkerchiefs, etc.) and delicate clothes (thin tights, stockings,
etc.) into a special net or a pillowcase.
It is recommended to wash uplifts (bras) with plastic inserts (which are fit for machinewashing) in a special
bag, since inserts may get into the Machine interior through drum openings and damage the mechanisms.
Examine the drum for absence of foreign objects and occasional presence of domestic animals (pets).
Load your clothes items into the drum. For better results of washing and spinning, it is recommended
to wash big and small items together.
ATTENTION! At non-uniform distribution of items in the drum, the spinning speed will drop
automatically, or no spinning will take place (it would not switch on).
NEVER load the machine only with the items made of fabrics, which absorb a lot of water (terry (Turkish)
towels, gowns, mats, etc.), to avoid overloading.
ATTENTION! Close the door of the Machine until you hear a clear click of the lock (anti-closing block-
ing should be removed). The items should not be pinched between the door and the sealing gasket.
ORDER OF OPERATION
Check for correct installation of the filling and draining hoses.
If the Machine was not in use for a long time, drain off the stagnant water by unscrewing the nut and
disconnecting the hose from the water supply tap. Connect the filing hose.
Open the water supply tap.
Load the respective compartments of the drawer with the washing powder intended for automatic
washers, and any special treatment substances. Close the drawer.
Insert the electric power plug into the socket (receptacle) of the electric mains.
For switching the Machine on, rotate the Wash Program Selector away from its position
mark corresponding to the selected program). The display indication zones highlight the basic program parameters
(main operations, maximum washing temperature and spinning rotation speed, and washing cycle duration.
Averaged time of selected washing program duration is displayed.
The real time of a washing may differ from the displayed one as it depends on water temperature and
pressure in water-supply line, weight of laundry, type of good's cloths, voltage magnitude in electric main, etc.
ATTENTION! Nonconcurrency in displayed reading of time up to the end of washing with its real
termination time is admitted.
If necessary, you may set optional functions, select the temperature and spinning rotation speed.
To start the Machine operation under the selected program, press the button
illuminates on the button and sound signal is generated. The door locking device operates, and the display
starts showing the indicators of the washing program and program operations.
If you have set the delay washing time, the time indicator of the display will show slowly blinking delay
time with a onehour interval. Upon expiry of the preset time, the Machine will start to perform the selected
program, and the time indicator will count down the cycle time.
After the end of the last washing operation, the door blocking device will switch off – a triple sound
signal will be heard with a one-minute interval. The display will show "END", and the
40
(Cotton) and the
and set it to the
– the indicator
indicator will go out.
Publicité
