Notes And Signs On The Product; Residual Risk - Kemper MaxiFil Notice D'utilisation

No reasonable, foreseeable misuse is possible which could lead to dangerous
situations with personal injury when working with the product whilst adhering to its
intended use.

3.5 Notes and signs on the product

Various notes and signs are fitted on the product. If these are damaged or removed,
please replace them immediately with new ones in the same location.
The operating company is obliged to post further notes and signs on the product and
its surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for wearing
personal protective equipment.

3.6 Residual risk

Even when all safety rules are observed, when operating the product a residual risk
remains, as described below.
All persons working on and with the product must be aware of these residual risks
and follow the instructions that prevent these residual risks from causing accidents or
damages.
WARNING
Danger of serious injury to the lungs and respiratory tract – always wear respiratory
protection, Class FFP2 or higher.
Skin contact with welding fumes, etc. can cause irritation of sensitive skin – wear
protective clothing.
Before starting welding work, ensure that the product is positioned correctly, the
filter elements are complete and undamaged, and the device is running! The
product is only fully functional when it is switched on.
Skin contact with separated dust may occur when changing the filter cartridges,
dust may be also be stirred up in the process. Respiratory protection and protective
clothing must be worn.
Embers in the filter elements may cause smouldering fires – switch off the product,
close the damper flap in the collection element if fitted and let the device cool
down in a controlled manner.
1502762-00 - 53 -
EN