Annex; Ec Compliance Statement - Kemper MaxiFil Notice D'utilisation

9 Annex

9.1 EC compliance statement

Designation:
Series:
Type:
Machine no.:
Company:
The following harmonized standards are used:
EN ISO 12100
EN ISO 13857
EN 349
EN 61000-6-2
EN 61000-6-4
EN 60204-1
EN 13849
A complete list of standards, directives and specifications, is available from the
manufacturer. The operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity
expires, unless confirmed in writing by us as manufacturers.
Vreden, 10.08.2018
Place, date
1502762-00
Welding fume filter unit
MaxiFil
65650 (poss. deviating item number for other product version)
See nameplate in front section of this operating manual
This product is developed, designed and manufactured in
accordance with EC directives
2006/42/EC - Machinery Directive
2014/30/EU - Electromagnetic Compatibility
2014/68/EU - Pressure Vessels, Art 3, Para. 3
2014/35/EU - Low Voltage Directive
on the sole responsibility of
KEMPER GmbH
Von-Siemens-Str. 20, D-48691 Vreden
Safety of Machinery, Equipment and Systems
Safety of Machinery, Safety Clearing top and bottom Limbs
Safety of Machinery, Minimum Clearing, Crushing of Body Parts
Interference immunity EMV
Interference emission EMV
Safety E-technology
Safety of control systems
M. Schiller
Executive Director
Identification of the signatory
- 69 -
EN