Publicité
Les langues disponibles
Les langues disponibles
2.4 Changing the display measurement unit
Desk height can be displayed in centimetres or inches. To change the measurement unit:
1.
Press and hold the "logo" button for approx. 5 seconds
2.
Confirm option from the control panel menu by pressing the "logo" button again
3.
Select one of the measurement units by pressing the "up" or "down" button
The symbol "I" will appear for inches and "C" for centimetres
4.
Confirm the measurement unit selection by pressing the "logo" button. To exit the menu
without making a selection, wait for about 10 seconds until the height value is shown on
the display again.
2.5 Aligning the displayed height with the actual heightj
If the actual height does not correspond to the height shown on the control panel display, it can
be corrected. To do that, you need to:
1.
Press and hold the "logo" button for approx. 5 seconds
10 EN
Publicité
